KKS 400 NA
Semi-automatic Mitring Circular Sawing Machine
KKS 400 NA BENEFITS AT A GLANCE
- saw blade: Ø 400 mm
- Mitre cuts +/- 90 Degrees
- Automatic processing of flat, angle and solid materials, tubes and special profiles
- Optimum swarf flow through the KALTENBACH “cut from below” principle
- High cutting quality through workpiece clamping on both sides of the saw blade and infinitely variable adjustment of the saw-blade feed, as well as contactless saw blade return stroke
- Short cutting and cycle times through electronic cutting-height adjustment and rapid reverse motion of the saw blade
- Minimal end-piece lengths due to special gripper design
- Simple operation and programming via NC control
- Space saving installation
FEATURES
Precise Cuts
Robust, powerful drive with hardened and ground helical gears
Smooth operation
Workpiece Clamping
135 mm stroke
Large scale pressure piece for secure clamping on both sides of the saw blade
Hand crank for pre-adjustment
Flexible in material measurement, especially within wide limits
Individual Feed Adjustment
Universal, infinitely-variable adjustment, even during the sawing process
Lower feed rate with stainless steels, higher feed rate for tubes
Feed movement via hydraulic cylinder
Material Related Cutting Speed
Adaptable to the material
Two cutting speeds as standard
Automated Sawing Process
Efficient processing of medium and large batches
Minimal end-piece lengths due to optimized gripper contour
Multiple-stroke for cutting lengths up to 9.999 mm
High Productivity through Recallable Saw Programming
Storing of programs with different sawing tasks
Bar/quantity-oriented mode of operation
Automatic Zero-Point Recognition
High level of automation of preset sawing tasks, e.g., with pre-connected magazine
High Level of Automation
Automatic pivoting between two angles (optional)
Automatic, program-controlled processing of cutting sequences
TECHNICAL DATA
| Drive performance | kW | 1,8/2,7 |
| Dimensions (L x W x H) | mm | 3140 x 1950 x 1805 |
| Weight | kg | approx. 1.700 |
| Supply and discharge side | Sawing | |
| Sawblade | Ø mm | 400 |
| Cutting speed | m/min | 13/26; 10/20; 15/30 |
| Sawblade feedrate | mm/min | 0-1.000 |
| Rapid advance/return movement | mm/min | 3.300 |
| Working range Square | mm | 120 |
| Working range Flatmaterial | mm | 305x20 |
| Working range Roundmaterial | mm | 130 |
| Mitre range | 0-180° | |
| Tools | HSS-Tools | |
| Degree of Automation | automatic infeed | |
| Full-Automatic | ||
| Material class | Stainless Steel, | |
| Non-ferrous metal | ||
| Steel | ||
| Working processes | Solid Material | |
| Profiles |